Nosso grupo organiza mais de 3.000 Séries de conferências Eventos todos os anos nos EUA, Europa e outros países. Ásia com o apoio de mais 1.000 Sociedades e publica mais de 700 Acesso aberto Periódicos que contém mais de 50.000 personalidades eminentes, cientistas de renome como membros do conselho editorial.

Periódicos de acesso aberto ganhando mais leitores e citações
700 periódicos e 15 milhões de leitores Cada periódico está obtendo mais de 25.000 leitores

Indexado em
  • Índice Copérnico
  • Google Scholar
  • Sherpa Romeu
  • Abra o portão J
  • Genâmica JournalSeek
  • Chaves Acadêmicas
  • Biblioteca de Periódicos Eletrônicos
  • RefSeek
  • Universidade Hamdard
  • EBSCO AZ
  • OCLC – WorldCat
  • Catálogo online SWB
  • Biblioteca Virtual de Biologia (vifabio)
  • Publons
  • Euro Pub
Compartilhe esta página

Abstrato

Behaviour of Double Skinned Composite Columns with Concrete Filled Tubular Columns

Hasan Hastemoglu

This paper comprises of the experimental study of five (5) double skinned concrete filled steel tubular (DSCFT ) columns of concentrically placed circular sections filled with self-compacting concrete (SCC). Tests on the specimens were made by applying axial loads. The main experimental parameter varied for columns were slenderness ratio. The test results of DSCFT columns are compared with another five (5) concrete filled tube (CFT) columns of same area of steel (Ast) and outer diameter as in DSCFT columns. Both filled with self-compacting concrete of grade M50. Testing of specimens investigates the behaviour on load deflection, confinement effect, and the strength of the columns. Various characteristics such as stiffness, ductility and failure mode are also discussed with the help of load deflection curves. The comparison with concrete filled tube (CFT) to the double skinned concrete filled tube (DSCFT) columns likely to be show that DSCFT columns are similar to CFT columns in performance and DSCFT shows better in cost concern than CFT. Theoretical analysis was also done and compared with the experimental results. Comparison of various codes like (EC4, LRFD, ACI) was also done. The results reveal that EC4 is better predictable than others).

An ANSYS modelling was also done for two specimens to calibrate the test results obtained from experiments. The results from the experimental study were compared with the ANSYS results. The result shows that there is little difference in deformations between the ANSYS and experimental results.

Isenção de responsabilidade: Este resumo foi traduzido usando ferramentas de inteligência artificial e ainda não foi revisado ou verificado.